2019 CDT Codes...Cleanings Category and Space Maintainers?

For users or potential users.
Post Reply
Third Coast
Posts: 30
Joined: Fri Nov 14, 2014 4:56 pm

2019 CDT Codes...Cleanings Category and Space Maintainers?

Post by Third Coast »

I just imported the new 2019 CDT codes and noticed a new category named "Cleanings" was created and D1516, 1517, 1526, 1527 all pertaining to space maintainers were added to this category.

I'm assuming this is an error, so wanted to point it out. Any recommendations to which category I should move these codes? Also, being that these are currently my only codes within this category, any recommendations for use of "Cleanings" category? Thanks.
teethdood
Posts: 267
Joined: Sun Jul 29, 2007 12:39 am
Location: Visalia, CA
Contact:

Re: 2019 CDT Codes...Cleanings Category and Space Maintainer

Post by teethdood »

I have them placed in the Ortho category.
Philip H. Doan, DDS
http://www.kaweahdental.com/
User avatar
jsalmon
Posts: 1609
Joined: Tue Nov 30, 2010 12:33 pm
Contact:

Re: 2019 CDT Codes...Cleanings Category and Space Maintainer

Post by jsalmon »

I'll have someone look into this. What version of Open Dental are you using?
The best thing about a boolean is even if you are wrong, you are only off by a bit.

Jason Salmon
Open Dental Software
http://www.opendental.com
User avatar
jsalmon
Posts: 1609
Joined: Tue Nov 30, 2010 12:33 pm
Contact:

Re: 2019 CDT Codes...Cleanings Category and Space Maintainer

Post by jsalmon »

Issue verified and added to our bug tracker.
https://opendentalsoft.com:1943/ODBugTr ... sions.aspx
The best thing about a boolean is even if you are wrong, you are only off by a bit.

Jason Salmon
Open Dental Software
http://www.opendental.com
Third Coast
Posts: 30
Joined: Fri Nov 14, 2014 4:56 pm

Re: 2019 CDT Codes...Cleanings Category and Space Maintainer

Post by Third Coast »

Version 18.3.37.0, although I see you've verified it already.

Thanks for the suggestion teethdood.
saulg
Posts: 3
Joined: Mon Jan 23, 2017 4:30 pm

Re: 2019 CDT Codes...Cleanings Category and Space Maintainer

Post by saulg »

The bug "New 2019 procedure codes were sometimes getting set to the wrong category" has been fixed and will be released with v18.3.39 and v18.4.11
https://opendentalsoft.com:1943/ODBugTr ... sions.aspx

Note that once you are on this version, you will need to run the D-Codes tool to get the codes into the proper category.
http://opendental.com/manual/procedurecodetools.html
Post Reply